LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Mechanical - 1.4L (LV7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Lift Rear Bracket Replacement (LV7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood
  2. Unclip the wiring harness retainer (1, 2).
    Fig 1: Wiring Harness Retainers
    GM4230633Courtesy of GENERAL MOTORS COMPANY
  3. Remove the engine wiring harness bracket bolt (1) and remove the engine wiring harness bracket (2).
    Fig 2: Engine Wiring Harness Bracket And Bolt
    GM4230634Courtesy of GENERAL MOTORS COMPANY
  4. Remove the engine lift rear bracket bolts (1).
    Fig 3: Engine Lift Rear Bracket And Bolts
    GM4230635Courtesy of GENERAL MOTORS COMPANY
  5. Remove the engine lift rear bracket (2).
scientia non olet · About LEMON Manuals