LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Mechanical - 1.4L (LV7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Crankshaft Position Sensor Reluctor Ring Replacement (LV7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine flywheel. Refer to Engine Flywheel Replacement (LV7) .
  2. Remove the crankshaft position sensor reluctor ring (2).
    Fig 1: Crankshaft Position Sensor Reluctor Ring
    GM3763326Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals