LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Mechanical - 1.4L (LV7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Crankshaft Position Sensor Reluctor Ring Replacement (LV7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the crankshaft position sensor reluctor ring (2).
    Fig 1: Crankshaft Position Sensor Reluctor Ring
    GM3763326Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Crankshaft Position Sensor Reluctor Ring Caution .
  2. Install the pin (3) into the correct hole (1).
  3. Install the engine flywheel. Refer to Engine Flywheel Replacement (LV7) .
scientia non olet · About LEMON Manuals