LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Transmission Cooling System) >> Diagnostic Information and Procedures >> Transmission Fluid Cooler Flow Test and Flushing >> Code Recording Procedure

Code Recording Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the main function switch to the CODE position.
    Fig 1: View Of Main Function Switch CODE Position
    GM1212346Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • If power is interrupted prior to the recording of the seven-character code, the code will be lost and the flow rate test will need to be repeated.
    • The flow test must run for a minimum of 8 - 10 seconds and be above 0.5 gallons per minute for a code to be generated.
  2. Record TESTED flow rate, temperature, cycle and seven-character flow code information on repair order.
scientia non olet · About LEMON Manuals