LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Automatic Transmission - JATCO CVT) >> Repair Instructions - On Vehicle >> Transmission Rear Mount Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Using a suitable jack stand, support the rear of the powertrain.
  3. Remove and DISCARD the transmission mount strut front bolt (1).
    Fig 1: Transmission Mount Strut Front Bolt
    GM4113891Courtesy of GENERAL MOTORS COMPANY
  4. Remove and DISCARD the transmission mount strut bracket bolts (1).
    Fig 2: Transmission Mount Strut Bracket And Bolts
    GM4113893Courtesy of GENERAL MOTORS COMPANY
  5. Remove the transmission mount strut bracket (2) from the transmission.
scientia non olet · About LEMON Manuals