LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Automatic Transmission - JATCO CVT) >> Diagnostic Information and Procedures >> Transmission Service Fast Learn Procedure (MR8) >> Procedure Description >> Components

Procedure Description: Components

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

The Transmission Service Fast Learn Procedure for the CVT automatic transmission consists of two parts. The first part is an automated version of the Transmission Adaptive Pressure Reset Procedure, which is used to synchronize the transmission control module with the ROM assembly in the transmission. The second part consists of a series of tests which are run to allow the transmission control module (TCM) to learn individual clutch characteristics. Once the clutch data is learned, the procedure translates it into the adaptive data cells which the TCM uses for clutch control during shifts. The scan tool provides initiation of the Transmission Service Fast Learn procedure. This procedure is to be used following transmission repairs.

scientia non olet · About LEMON Manuals