LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Manual Transmission - Y4A/Y4M (MR7)) >> Repair Instructions - On Vehicle >> Transmission Fluid Drain and Fill >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the NEW transmission case oil drain plug (2) and tighten to 25 N.m (18 lb ft).
    Fig 1: Transmission Case Oil Level Check Plug And Oil Drain Plug
    GM4039173Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  2. Add transmission fluid until it seeps out of the fluid level check plug hole.
  3. Install the NEW transmission case oil level check plug (1) and tighten to 25 N.m (18 lb ft).
  4. Lower the vehicle.