LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Manual Transmission - Y4A/Y4M (MR7)) >> Repair Instructions - On Vehicle >> Transmission Control Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the transmission control (3) in the vehicle.
    Fig 1: Transmission Control, Bolts And Nuts
    GM4039146Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  2. Install the transmission control bolts (1) and nuts (2) and tighten to 9 N.m (80 lb in).
  3. Install the shift lever and selector lever cable (2) to the transmission control housing.
    Fig 2: Shift Lever And Selector Lever Cable, Shift Control Housing And Selector And Shift Lever Cable Bracket
    GM4039066Courtesy of GENERAL MOTORS COMPANY
  4. Connect the shift lever and selector lever cable (1) to the transmission control lever.
  5. Install the front floor console. Refer to Front Floor Console Replacement .
scientia non olet · About LEMON Manuals