LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Manual Transmission - Y4A/Y4M (MR7)) >> Repair Instructions - Off Vehicle >> Shift Shaft and Fork Assemblies Disassemble >> 5th-Reverse Gear Shift Shaft Disassemble

5th-Reverse Gear Shift Shaft Disassemble

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the gear unit. Refer to Transmission Disassemble .
    Fig 1: 5th-Reverse Gear Shift Shaft Assembly Components
    GM3970973Courtesy of GENERAL MOTORS COMPANY
  2. Remove the 5th-reverse gear shift shaft assembly from the gear unit.
  3. Remove the shift shaft (1) from the reverse shift arm.
  4. Remove the 5th-reverse gear ball (3) and the reverse shift guide ball and spring (2) from the reverse shift arm.
  5. Fix the shift shaft assembly into a vise with a protector.
  6. Remove the reverse gear shift arm pin (1) using a pin punch and a hammer.
    Fig 2: Reverse Gear Shift Arm, Shift Arm Pin, 5th Gear Shift Yoke And Shift Yoke Pin
    GM2493603Courtesy of GENERAL MOTORS COMPANY
  7. Remove the reverse gear shift arm (2).
  8. Remove the 5th gear shift yoke pin (3) using a pin punch and a hammer.
  9. Remove the 5th gear shift yoke (4).
scientia non olet · About LEMON Manuals