Shift Fork Cleaning and Inspection
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Measure the end thickness of shift fork and replace if necessary.
Specifications
- The standard shift fork end thickness for the low speed shift fork is 8.7 mm (0.343 in).
- The shift fork end thickness limit for the low speed shift fork is 8.56 mm (0.337 in).
- The standard shift fork end thickness for the high speed shift fork is 7.8 mm (0.307 in).
- The shift fork end thickness limit for the high speed shift fork is 7.66 mm (0.302 in).
- The standard shift fork end thickness for the fifth gear shift fork is 7.8 mm (0.307 in).
- The shift fork end thickness limit for the fifth gear shift fork is 7.66 mm (0.302 in).