Circuit/System Description
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
The clutch pedal position (CPP) sensor is a three wire sensor, connected to a 5 V reference circuit, a low reference circuit and a signal circuit. The engine control module supplies 5 V to the CPP sensor and also provides a sensor ground path on the low reference circuit. The CPP sensor sends a voltage signal to the ECM on the signal circuit. The voltage on the signal circuit will vary from a voltage near 4 V when the clutch pedal is released, to a voltage near 1 V when the clutch pedal is applied.