LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Instrument Panel System Displays And Gauges) >> Diagnostic Information and Procedures >> Driver Information Center Display Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify no DTC is set.
    • If no DTCs are set 
  3. Verify all indicators except the engine malfunction indicator illuminate and turn off as commanded when performing the All Indicators test with the scan tool.
    • If any indicators do not illuminate and turn off as commanded 

      Replace the P16 Instrument Cluster.

    • If all indicators respond properly 
  4. Verify all segments illuminate when performing the Driver Information Center Segments test with the scan tool.
    • If any segments do not illuminate 

      Replace the P16 Instrument Cluster.

    • If all segments illuminate properly 
  5. All OK.
scientia non olet · About LEMON Manuals