LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Instrument Panel System Displays And Gauges) >> Diagnostic Information and Procedures >> DTC P0461-P0464: Fuel Level Sensor >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Fuel Remaining in Tank parameter is between 5 - 95% and varies with fuel level.
    • If not between 5 - 95% or does not vary with fuel level 

      Refer to Circuit/System Testing.

    • If between 5 - 95% and varies with fuel level 
  3. Verify that all fuel level gauge segments illuminate when performing the scan tool Fuel Gauge Sweep control function commanded to 80%.
    • If any fuel level gauge segments do not illuminate 

      Replace the P16 Instrument Cluster.

    • If all fuel level gauge segments illuminate 
  4. All OK.
scientia non olet · About LEMON Manuals