LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Manual Transmission Clutch) >> Repair Instructions >> Clutch Actuator Cylinder Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the 3 clutch actuator cylinder threads in clutch housing.
  2. Install the clutch actuator cylinder (2).
    Fig 1: Clutch Actuator Cylinder And Bolts
    GM4010350Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Clutch Actuator Cylinder Mounting Sleeve Caution .
  3. Install the 3 clutch actuator cylinder bolts (1) and tighten to 9 N.m (80 lb in).
    CAUTION: Refer to Fastener Caution .
  4. Install the clutch actuator cylinder pipe. Refer to Clutch Actuator Cylinder Pipe Replacement .
  5. Install the transmission. Refer to Transmission Replacement (With 1.0L Engine)Transmission Replacement (With 1.4L Engine) .
scientia non olet · About LEMON Manuals