LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Manual Transmission Clutch) >> Repair Instructions >> Clutch Actuator Cylinder Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. Refer to Transmission Replacement (With 1.0L Engine)Transmission Replacement (With 1.4L Engine) .
  2. Remove the clutch actuator cylinder pipe elbow. Refer to Clutch Actuator Cylinder Pipe Elbow Replacement .
  3. Remove the retaining clip (1) from the clutch actuator cylinder.
    Fig 1: Clutch Actuator Cylinder Pipe, Retaining Clip And Fastening Sleeve
    GM4010323Courtesy of GENERAL MOTORS COMPANY
  4. Squeeze the fastening sleeve (arrows) and push the fastening sleeve (3) and clutch actuator cylinder pipe (2) out of the transmission housing.
  5. Remove the clutch actuator cylinder pipe (1) from the fastening sleeve (2).
    Fig 2: Clutch Actuator Cylinder Pipe And Fastening Sleeve
    GM4010340Courtesy of GENERAL MOTORS COMPANY
    NOTE: Release the fastening sleeve keys (arrows) using a screwdriver or equivalent to remove the fastening sleeve.
scientia non olet · About LEMON Manuals