LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Manual Transmission Clutch) >> Repair Instructions >> Clutch Actuator Cylinder Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the clutch actuator cylinder pipe (1) into the fastening sleeve (2).
    Fig 1: Clutch Actuator Cylinder Pipe And Fastening Sleeve
    GM4010340Courtesy of GENERAL MOTORS COMPANY
  2. Install the clutch actuator cylinder pipe (1) with the fastening sleeve (2) into the transmission housing.
  3. Install the clutch actuator cylinder pipe (1) to the clutch actuator cylinder (3).
  4. Install the retaining clip (1) to the clutch actuator cylinder (2).
    Fig 2: Clutch Actuator Cylinder And Retaining Clip
    GM4010423Courtesy of GENERAL MOTORS COMPANY
  5. Install the clutch actuator cylinder pipe elbow. Refer to Clutch Actuator Cylinder Pipe Elbow Replacement .
  6. Install the transmission. Refer to Transmission Replacement (With 1.0L Engine)Transmission Replacement (With 1.4L Engine) .
scientia non olet · About LEMON Manuals