LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Windshield Defroster Nozzle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the windshield defroster outlet duct right side (2) and left side (3) to the wind shield defroster nozzle (1).
    Fig 1: Windshield Defroster Nozzle, Defroster Outlet Duct Right Side And Left Side
    GM4051955Courtesy of GENERAL MOTORS COMPANY
  2. Install the windshield defroster duct assembly (2).
    Fig 2: Windshield Defroster Duct Assembly Screws And Defroster Duct Assembly
    GM4051954Courtesy of GENERAL MOTORS COMPANY
  3. Install the windshield defroster duct assembly screws (1) and tighten to 1.3 N.m (12 lb in).
    CAUTION: Refer to Fastener Caution .
  4. Install the I/P outer air outlet duct. Refer to Instrument Panel Outer Air Outlet Duct Replacement .
  5. Install the instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement .