LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Flushing (R-1234yf) >> Reverse Flushing Setup

Reverse Flushing Setup

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install both GE - 45268-9  fitting O-ring onto GE - 45268-10  adapter.
    NOTE:
    • Reverse flow refrigerant flush is recommended for desiccant bag failure. Replace condenser/receiver dehydrator assembly when A/C flush is complete and perform the following procedure:
    • Inspect and lubricate GE - 45268  adapter kit fitting O-rings. Refer to Air Conditioning O-Ring Seal Replacement .
  2. Install GE - 45268-7  fitting O-ring onto suction side of GE - 45268-10  adapter.
  3. Install GE - 45268-131  fitting O-ring onto discharge side of GE - 45268-10  adapter.
scientia non olet · About LEMON Manuals