LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Air Conditioning System Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disassemble the A/C refrigerant components. Refer to the appropriate repair procedure.
  2. Cap or tape the A/C refrigerant components.
    NOTE: Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
  3. Remove the sealing washer (1) from the A/C refrigerant component.
    Fig 1: A/C Refrigerant Sealing Washer
    GM2611419Courtesy of GENERAL MOTORS COMPANY
  4. Inspect the seal washer for signs of damage to help determine the root cause of the failure.
  5. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
  6. DISCARD the sealing washer.
    NOTE: DO NOT reuse sealing washer.
scientia non olet · About LEMON Manuals