LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Exhaust System) >> Repair Instructions >> Fuel Tank Heat Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
  2. Exhaust Muffler - Remove - Exhaust Muffler Replacement (L5Q) Exhaust Muffler Replacement (LV7) 
  3. Place a suitable adjustable jack under the fuel tank.
  4. Fuel Tank Strap Bolt (1) - Remove [2x]
    Fig 1: Fuel Tank Strap Bolt
    GM4663601Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Do not bend the fuel tank straps. Bending the fuel tank straps may cause damage to the straps.
  5. Fuel Tank Strap (2) - Remove
  6. Fuel Tank Heat Shield Retainer (1) - Remove [3x]
    Fig 2: Fuel Tank Heat Shield And Retainer
    GM4663602Courtesy of GENERAL MOTORS COMPANY
  7. Fuel Tank Heat Shield (2) - Remove