Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Open the hood.
Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the exhaust muffler. Refer to Exhaust Muffler Replacement (LV7) .
Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .
Remove the catalytic converter brace bracket bolts (1), nuts (2) and catalytic converter brace bracket (3).

Fig 1: Catalytic Converter Brace Bracket Bolts
Courtesy of GENERAL MOTORS COMPANY
Lower the vehicle.
Disconnect the heated oxygen sensor 1 connector.

Fig 2: Heated Oxygen Sensor Connector
Courtesy of GENERAL MOTORS COMPANY
Remove the catalytic converter heat shield bolts (1) and remove the catalytic converter heat shield.

Fig 3: Catalytic Converter Heat Shield Bolts
Courtesy of GENERAL MOTORS COMPANY
Remove the catalytic converter nuts (1).

Fig 4: Catalytic Converter Nuts
Courtesy of GENERAL MOTORS COMPANY
Remove the catalytic converter (2) and gasket.
Remove the catalytic converter (1) and gasket (2) from the vehicle.

Fig 5: Catalytic Converter And Gasket
Courtesy of GENERAL MOTORS COMPANY
Remove and discard the gasket.