LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> FEP Connectors (Steering Gear) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a flat-bladed tool to release the locking tab on the connector.
    Fig 1: Releasing Locking Tab On Connector
    GM2374629Courtesy of GENERAL MOTORS COMPANY
  2. Option 1: Twist the flat-bladed tool to push the top of the locking tab inward while pulling the connector body out.
    Fig 2: Twisting Flat-Bladed Tool To Push Top Of Locking Tab Inward
    GM2728308Courtesy of GENERAL MOTORS COMPANY
  3. Option 2: Pry using the flat-bladed tool to depress the locking tab while pulling the connector body out.
    Fig 3: Using Flat-Bladed Tool To Depress Locking Tab
    GM2728310Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals