LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Engine Controls And Fuel - 1.4L (LV7) - DTC P0351 To DTC P2544 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P057B-P057E: Brake Pedal Position Sensor >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

P057B 

ECM detects the BPP sensor signal is stuck in a range for greater than 1 s.

P057C 

ECM detects the BPP sensor voltage is less than 0.25 V greater than 1 s.

P057D 

ECM detects the BPP sensor voltage is greater than 4.75 V greater than 1 s.

P057E 

ECM detects the BPP sensor value varies greater than a calibrated value.