Fastener Specifications
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal.
|
|
| Front Fog Lamp Bezel Screw | 2 N.m (18 lb in) |
| Front Fog Lamp Cover Screw | 2 N.m (18 lb in) |
| Front License Plate Bracket Screw | 2.5 N.m (23 lb in) |
| Radiator Grille Emblem Screw | 2.5 N.m (23 lb in) |
| Radiator Lower Grille Screw | 2 N.m (18 lb in) |
| Radiator Upper Grille Screw | 2 N.m (18 lb in) |
| Rear End Spoiler Bolt | 5 N.m (44 lb in) |
| Rear End Spoiler Nuts | 5 N.m (44 lb in) |
| Rocker Panel Molding Screw | 1.5 N.m (13 lb in) |