LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Wiper System And Washer System) >> Diagnostic Information and Procedures >> Washer Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Windshield Washer Switch parameter changes between Inactive and Active when pressing the washer switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing - Windshield Washer Switch Malfunction.

    • If the parameter changes 
  3. Verify the G24 Windshield Washer Pump activates when commanding the Windshield Washer Relay On and Off with a scan tool.
    • If the G24 Windshield Washer Pump does not activate 

      Refer to Circuit/System Testing - Windshield Washer Pump Malfunction

    • If the G24 Windshield Washer Pump activates 
  4. All OK.
scientia non olet · About LEMON Manuals