Rear Side Door Sill Garnish Molding Replacement
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Pull up on the front of the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation (Base)Rear Seat Cushion Removal and Installation (60 Percent Seat)Rear Seat Cushion Removal and Installation (40 Percent Seat) .
NOTE:
Do not need to remove the rear seat cushion completely.
|
|
| 1 | Rear Side Door Sill Garnish Molding Clip (Qty: 2)
CAUTION:
Refer to Fastener Caution
.
|
| 2 | Rear Side Door Sill Garnish Molding Procedure Use a flat bladed plastic tool to remove. |