LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Controls And Fuel - 1.4L (LV7) - Repair Instructions) >> Repair Instructions >> Vacuum Pump Assembly Replacement (L5Q) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake booster vacuum pipe (1) from the vacuum pump. Refer to Plastic Collar Quick Connect Fitting Service .
    Fig 1: Brake Booster Vacuum Pipe And Vacuum Pump
    GM4035571Courtesy of GENERAL MOTORS COMPANY
  2. Remove the surge tank fixing bolts and set aside.
    Fig 2: Surge Tank And Fixing Bolts
    GM4035574Courtesy of GENERAL MOTORS COMPANY
  3. Remove the 3 vacuum pump bolts (2).
    Fig 3: Vacuum Pump Bolts
    GM4035578Courtesy of GENERAL MOTORS COMPANY
  4. Remove the vacuum pump (1).
  5. Remove and DISCARD the vacuum pump gasket.
scientia non olet · About LEMON Manuals