Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Install the fuel feed pipe (3) to the vehicle.

Fig 1: Fuel Feed Pipe And Retainers
Courtesy of GENERAL MOTORS COMPANY
Install the fuel feed pipe (3) to the retainers (1).
Connect the fuel feed pipe fitting (2) to fuel feed/evaporative emission separator at the tank. Refer to Plastic Collar Quick Connect Fitting Service .
Install the fuel feed pipe (2) to the retainers (1).

Fig 2: Fuel Feed Pipe And Retainers
Courtesy of GENERAL MOTORS COMPANY
Lower the vehicle.
Install the fuel feed pipe (3) to the retainer (2).

Fig 3: Fuel Feed Pipe Fitting And Fuel Rail
Courtesy of GENERAL MOTORS COMPANY
Connect the fuel feed pipe fitting (1) to the fuel rail. Refer to Plastic Collar Quick Connect Fitting Service .
Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (L5Q) .