Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Install the evaporative emission pipe (3) to the vehicle.

Fig 1: Evaporative Emission Pipe
Courtesy of GENERAL MOTORS COMPANY
Install the evaporative emission pipe (3) to the retainers (1).
Connect the evaporative emission pipe fitting (2) to the evaporative emission canister purge pipe at the tank. Refer to Plastic Collar Quick Connect Fitting Service .
Install the evaporative emission pipe (2) to the retainers (1).

Fig 2: Evaporative Emission Pipe And Retainers
Courtesy of GENERAL MOTORS COMPANY
Lower the vehicle.
Install the evaporative emission pipe fitting (1) to the fuel rail. Refer to Plastic Collar Quick Connect Fitting Service .

Fig 3: Evaporative Emission Pipe Fitting And Evaporative Emission Canister Purge Solenoid Valve
Courtesy of GENERAL MOTORS COMPANY