Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine control module. Refer to the Engine Control Module Replacement .
Disconnect the 2 engine master harness wiring harness retainer (1) and evaporative emission canister purge solenoid valve hose.

Fig 1: Engine Master Harness Wiring Harness Retainers
Courtesy of GENERAL MOTORS COMPANY
Remove the transmission mount bracket bolt (1) and transmission mount bracket (2).

Fig 2: Transmission Mount Bracket Bolt
Courtesy of GENERAL MOTORS COMPANY
Disconnect the engine oil pressure sensor connector (1).

Fig 3: Engine Oil Pressure Sensor Connector
Courtesy of GENERAL MOTORS COMPANY
Remove the engine oil pressure sensor (2).