LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Cooling System) >> Repair Instructions >> Thermostat Bypass Pipe Replacement (L5Q) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Remove the catalytic converter. Refer to Catalytic Converter Replacement (L5Q) .
  3. Remove the clamp (2).
    Fig 1: Thermostat Bypass Pipe Bolt
    GM3707265Courtesy of GENERAL MOTORS COMPANY
  4. Remove the thermostat bypass pipe bolt (1).
  5. Remove the 2 thermostat bypass pipe bolts (2).
    Fig 2: Thermostat Bypass Pipe Gasket And Bolts
    GM3707266Courtesy of GENERAL MOTORS COMPANY
  6. Remove the thermostat bypass pipe (3).
  7. Remove and DISCARD the thermostat bypass pipe gasket (1).