LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Cooling System) >> Diagnostic Information and Procedures >> Engine Fails To Reach Normal Operating Temperature

Engine Fails To Reach Normal Operating Temperature

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Step Action Yes No
1
  1. Ensure that the cooling system is full.
  2. Allow the engine to cool.
  3. Start the engine.
  4. Turn the air conditioning system off.
  5. Inspect the engine cooling fan(s).
Is the electric cooling fan on?		 Go to Step 2  Go to Step 3 
2
  1. Diagnose and repair the cooling fan system.
  2. Verify the customer complaint.
Does the engine still fail to reach normal operating temperature?		 Go to Step 3  System OK
3 Install the Scan Tool to the DLC. Compare the Scan Tool coolant temperature reading to the I/P cluster coolant temperature.
Is the I/P cluster coolant temperature close to the reading on the Scan Tool?		 Go to Step 5  Go to Step 4 
4
  1. Diagnose and repair the coolant temperature gauge system.
  2. Verify the customer complaint.
Does the engine still fail to reach normal operating temperature?		 Go to Step 5  System OK
5 Inspect the thermostat for proper operation.
Is the thermostat operating properly?		 Go to Step 1  Go to Step 6 
6
  1. Replace the thermostat.
  2. Verify the customer complaint.
Does the engine still fail to reach normal operating temperature?		 Go to Step 1  System OK
scientia non olet · About LEMON Manuals