LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Lighting System) >> Repair Instructions >> Stop Lamp Switch Adjustment

Stop Lamp Switch Adjustment

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the stop lamp switch connector.
  2. Remove the stop lamp switch. Refer to Stop Lamp Switch Replacement .
  3. Pull out the plunger of the stop lamp switch to its maximum setting point.
  4. Install the stop lamp switch to the brake pedal bracket by twisting. Refer to Stop Lamp Switch Replacement .
  5. Depress the brake pedal to the bottom.
  6. Release the brake pedal slowly until reaching the end of the stop lamp switch plunger and the stop lamp switch will be adjusted of itself by the reaction force of the brake pedal.
  7. Connect the stop lamp switch connector.
scientia non olet · About LEMON Manuals