LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Lighting System) >> Repair Instructions >> Headlamp Replacement (BASE/SBM) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Headlamp Assembly
    GM4208732Courtesy of GENERAL MOTORS COMPANY
  1. Position the headlamp assembly (1) on the vehicle.
    2. Fig 2: Headlamp Electrical Connector
    GM4208726Courtesy of GENERAL MOTORS COMPANY
  2. Connect the headlamp electrical connector (1).
    3. Fig 3: Headlamp Screw
    GM4208719Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install the headlamp screw (1) and tighten to 2.5.
  4. Aim the headlamps after installation. Refer to Headlamp Aiming (North America) Headlamp Aiming (Except North America) .
scientia non olet · About LEMON Manuals