LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Lighting System) >> Diagnostic Information and Procedures >> DTC B2580: High Beam Control >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

DTC B2580 01 

The BCM detects a short to voltage in the headlamp high beam relay control circuit.

DTC B2580 02 

The BCM detects a short to ground in the headlamp high beam relay control circuit.

DTC B2580 04 

The BCM detects an open/high resistance in the headlamp high beam control circuit.

scientia non olet · About LEMON Manuals