Circuit/System Description
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
The front fog lamp relay is supplied with battery voltage at all times. The front fog lamp switch signal circuit is grounded through a resistor momentarily when the front fog lamp switch is pressed. The body control module (BCM) energizes the front fog lamp relay by applying ground to the front fog lamp relay control circuit. When the front fog lamp relay is energized, the relay contacts close and battery voltage is applied through the F32UA fuse to the front fog lamp control circuit which illuminates the front fog lamps.