Circuit/System Description

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

The seat belt tension sensor is a 2-wire sensor mounted on the passenger seat belt retractor and provides an input to the passenger presence module. When an infant car seat is properly restrained on the front passenger seat, the seat belt is tightly secured through the car seat. The seat belt pulls on the tension sensor and changes the voltage signal to the passenger presence module. The passenger presence module monitors the belt tension sensor signal circuit and if a fault is detected, DTC will be set. When the passenger presence module detects this DTC it will send out a serial data message and the inflatable restraint sensing and diagnostic module will notify the customer of the enable/disable status by illuminating the OFF indicator on the PASSENGER AIR BAG ON/OFF indicators. The inflatable restraint sensing and diagnostic module will then suppress the deployment of the passenger instrument panel air bag and illuminate the AIR BAG indicator.