Conditions for Setting the DTC
P0201, P0202, P0203, or P0204
The ECM detects the injector high voltage supply circuit or the injector high voltage control circuit is open for greater than 1 s.
P0261, P0264, P0267, or P0270
The ECM detects the injector high voltage control circuit is shorted to ground for greater than 1 s.
P0262, P0265, P0268, or P0271
The ECM detects the injector high voltage control circuit is shorted to voltage for greater than 1 s.
P1248, P1249, P124A, or P124B
The ECM detects the injector high voltage supply circuit is shorted to the injector high voltage control circuit for greater than 1 s.
P2147, P2150, P2153, or P2156
The ECM detects the injector high voltage supply circuit is shorted to ground for greater than 1 s.
P2148, P2151, P2154, or P2157
The ECM detects the injector high voltage supply circuit is shorted to voltage for greater than 1 s.