LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Automatic Transmission - 6T45 (MH7) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 3-5-Reverse and 4-5-6 Clutch Housing Disassemble (6T30/40/45/50 - Gen 2) >> Turbine Shaft, Reluctor Wheel and Piston Removal

Turbine Shaft, Reluctor Wheel and Piston Removal

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM2552953
Turbine Shaft, Reluctor Wheel and Piston Removal

Callout Component Name
1 Turbine Shaft Retaining Ring
Procedure 
Remove and DISCARD the retainer ring. It is not re-usable.
Special Tools 
GE 5586-A  Snap Ring Pliers or equivalent
Equivalent regional tools:Special Tools
2 Turbine Shaft
3 Reaction Carrier Hub
4 Reaction Carrier Hub Thrust Bearing
scientia non olet · About LEMON Manuals