LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC B147E or B147F: Battery Saver Relay >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enable battery saver mode (transport mode) in the vehicle.
  2. Verify that the appropriate devices controlled by the KR104A Battery Saver Relay 1 turn ON and OFF after enabling battery saver mode (transport mode).
    • If the devices do not turn ON and OFF 

      Refer to Circuit/System Testing.

    • If the devices turn ON and OFF 
  3. All OK.
scientia non olet · About LEMON Manuals