LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC B097C: Power Mode Run/Start Indicator Circuit >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the green LED turns ON and OFF when commanding the Run/Start Power Mode Indicator On and Off with the scan tool.
    • If the green LED does not turn ON and OFF 

      Refer to Circuit/System Testing.

    • If the green LED turns ON and OFF 
  3. All OK.
scientia non olet · About LEMON Manuals