Conditions for Setting the DTC

B097B 02

• The control module detects a short to ground in the vehicle ignition mode switch signal circuit
• The above condition exists for more than 1 s

B097B 04

• The control module detects an open in the vehicle ignition mode switch signal circuit
• The above condition exists for more than 1 s

B097B 05

• The control module detects an open in the vehicle ignition mode switch circuit
• The above condition exists for more than 1 s

B097B 08

• The control module detects a change in the ignition mode without observing a switch press
• The above condition occurs 4 consecutive times

B097B 61

• The control module detects a continuously closed ignition mode switch
• The above condition exists for more than 1 min