E42R Tail Lamp Assembly - Right (-MAH or -MBC)
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-19 (BK) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.75 | BK | 950 | Ground | I | -(MAH/MBC/MBM) |
| 2 | 0.5 | BK | 950 | Ground | I | -(MAH/MBC/MBM) |
| 3 | 0.5 | WH/YE | 7541 | Right Rear Stop Lamp Supply Voltage | I | -(MAH/MBC/MBM) |
| 4 | - | - | - | Not Occupied | - | - |
| 5 | 0.5 | BU/VT | 1335 | Right Rear Turn Signal Lamp Supply Voltage | I | -(MAH/MBC/MBM) |
| 6 | 0.5 0.5 |
GN/WH GN/WH |
24 24 |
Backup Lamp Supply Voltage Backup Lamp Supply Voltage |
I I |
LHD+T79/-(T79/MAH/MBC) RHD+T79/-(T79/MAH/MBC) |