Crankshaft Oil Deflector Installation

Fig 1: Exploded View Of Crankshaft Oil Deflector Components And Bolts With Tightening Sequence (L5Q)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Oil Pump Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten Tighten the oil pump bolts in sequence to 25 N.m (18 lb ft)
2	Oil Pump Bolt Tighten Tighten the oil pump bolt in sequence to 10 N.m (89 lb in)
3	Crankshaft Oil Deflector NOTE: Install a NEW crankcase vent passage seal.
4	Crankshaft Oil Deflector Bolt [3x] Tighten Tighten the crankshaft oil deflector bolts in sequence to 10 N.m (89 lb in)
5	Crankshaft Oil Deflector Bolt [2x] Tighten Tighten the crankshaft oil deflector bolts in sequence to 25 N.m (18 lb ft)
6	Oil Pump Drive Chain Cover
7	Oil Pump Drive Chain Cover Bolt Tighten 10 N.m (89 lb in)
8	Engine Oil Level Indicator Control Module Wiring Harness
9	Wiring Harness Connector Bolt Tighten 10 N.m (89 lb in)