LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Cylinder Head Disassemble (Europe) >> Cylinder Head Disassemble

Cylinder Head Disassemble

  1. Fig 1: Identifying Cylinder Head Components (Europe)
    GM4064799Courtesy of GENERAL MOTORS COMPANY

    Remove the camshaft bearing lower cap (1).

  2. Remove 2 camshaft bearing front cap locating pins (2).
  3. Remove 2 cylinder head core hole plugs (3) from the top of the cylinder head.
  4. Remove the cylinder head oil gallery plug (5) from the front of the cylinder head.
  5. Remove the cylinder head oil restrictor plug (4).
  6. Remove the cylinder head plug (6).
  7. GM4064801Courtesy of GENERAL MOTORS COMPANY

    Remove 2 cylinder head oil gallery plugs (1) from the side of the cylinder head.

  8. Remove 3 cylinder head studs (2). Discard the studs.
  9. GM4064804Courtesy of GENERAL MOTORS COMPANY

    Remove the cylinder head core hole plug (1) from the side of the cylinder head.

  10. GM4064805Courtesy of GENERAL MOTORS COMPANY

    Remove the cylinder head core hole plug (1) from the rear of the cylinder head.

scientia non olet · About LEMON Manuals