LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark ACTIV, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Engine Block Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

  1. Ensure proper use of room temperature vulcanizing (RTV) sealant. Properly clean all RTV surfaces, Refer to Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant .
  2. Remove any old thread sealant, gasket material or sealant using EN-28410  remover.
  3. Clean all the following areas with solvent:
    • Sealing surfaces
    • Cooling passages
    • Oil passages
    • Bearing journals
  4. Clean all threaded and through holes with solvent.
    5. WARNING:

    Refer to Safety Glasses Warning .

  5. Dry the engine block with compressed air.
scientia non olet · About LEMON Manuals