Cylinder Head Disassemble (Europe): Notes

Special Tools

• DT-113-2  Bracket
• EN-840  Pliers / Remover
• EN-6167  Support Set
• EN-6215  Mounting Equipment
• EN-46122  Camshaft Position Actuator Check-Ball Valve Remover/Installer
• EN-49155  Demounting Piece
• EN-49074  Universal Valve Spring Compressor Kit

For equivalent regional tools, refer to Special Tools .

1. Ensure DT-113-2  bracket is mounted appropriately to a work bench.
2. Install EN-6215-1  mounting table to DT-113-2  bracket.
3. Install the cylinder head to EN-6215-1  mounting table with the appropriate bolts packaged with EN-6215  .

4. Courtesy of GENERAL MOTORS COMPANY

   Remove the spark plugs (1).