Installation Procedure

Fig 1: Identifying Positive Crankcase Ventilation (PCV) Tube Assembly Components
Courtesy of GENERAL MOTORS COMPANY

Assemble the New positive crankcase ventilation valves (3) with the air cleaner outlet duct (1) and New positive crankcase ventilation tube (2).
Courtesy of GENERAL MOTORS COMPANY

Install the air cleaner outlet duct assembly (1, 2, 3) with positive crankcase ventilation tube and valve to the engine.
Using EN-50956 tamper proof drive bit tighten bolts (4) to 10 N.m (89 lb in).
Courtesy of GENERAL MOTORS COMPANY

Position the air cleaner outlet duct (1) in place and tighten the clamp (2) on the engine.
Install the positive crankcase ventilation tube (front). Refer to Positive Crankcase Ventilation Tube Replacement (Front) .