Positive Crankcase Ventilation Valve Replacement (Front)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the positive crankcase ventilation tube (front). Refer to Positive Crankcase Ventilation Tube Replacement (Front) . |
|
| 1 | Positive Crankcase Ventilation Valve Bolt
CAUTION:
Refer to Fastener Caution . Procedure Using a suitable tool, cut a slot in the tamper-resistant positive crankcase ventilation (PCV) bolt heads and remove with a flat-bladed tool. Discard bolts. Tighten 10 N.m (89 lb in) Special Tools EN-50956 Tamper Proof Drive Bit For equivalent regional tools, refer to Special Tools |
| 2 | Positive Crankcase Ventilation Valve |