Installation Procedure
Assemble the New positive crankcase ventilation tube (2) with air cleaner outlet duct assembly (1) and New positive crankcase ventilation valves (3).
Install the positive crankcase ventilation tube (2) with air cleaner outlet duct assembly (1) and valve (3) to the engine.
- Using EN-50956 tamper proof drive bit tighten bolts (4) to 10 N.m (89 lb in).
Position the air cleaner outlet duct (1) in place and tighten the clamp (2) on the engine.
- Install the positive crankcase ventilation tube (front).